No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The stamode connect failed, the reason is [STRING1].(Station Mac=[STRING2], AP Mac=[STRING3],Station Access Channel=[STRING4])


This log is supported only by V200R007C00.


The AR in station mode failed to connect to an AP.


Parameter Name Parameter Meaning
[STRING1] Indicates the reason for a failure to connect to an AP.
  • none: The connection timed out.
  • assoc-failed: Association failed.
  • auth-failed: Authentication failed.
  • beacon-miss: Beacon frames were lost.
  • deauth: The station is deauthenticated.
  • disassoc: The station is disassociated.
Station Mac Indicates the MAC address of a station.
AP Mac Indicates the MAC address of the AP.
Station Access Channel Indicates the access channel of the station.

Possible Causes

The AR in station mode failed to connect to an AP.


  1. This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 96761

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next