No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/6/RM_CIRC_CHANGE

ISIS/6/RM_CIRC_CHANGE

Message

ISIS/6/RM_CIRC_CHANGE:ISIS [process-id] failed to send the message that the physical interface changed.

Description

IS-IS failed to send the message that reported the change of the physical interface.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the ID of an IS-IS process.

Possible Causes

IS-IS failed to send the message that reported the change of the physical interface.

Procedure

  1. If a small number of logs are generated, wait for a while to see whether the normal state is entered. If so, no action is required.
  2. If a large number of logs are generated, contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 45292

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next