No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



IGMP/6/IF_ENTRY:In VPN instance "[vpn-instance-name]", IGMP discarded the received report ([source-address], [group-address]) because the number of IGMP group memberships reached the limit on the interface [interface-name]. The current statistical number of IGMP group memberships is [statistical-number]. (FlCode=[STRING][ULONG])


The IGMP Report message received from the interface was discarded because the number of IGMP entries on the interface reached the upper limit.


Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[interface-name] Indicates the interface name.
[statistical-number] Indicates the upper limit of the number of IGMP entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current interface was configured with the IGMP limit, when the number of IGMP entries on the interface reached the limit, the received IGMP Report message was discarded.


  1. If services are not affected, no action is required.
  2. If services are affected, run the igmp limit number command in the interface view to increase the maximum number of IGMP group memberships that the current interface can maintain.
  3. If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 96188

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next