No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PPP/4/LCPLOOPBACK

PPP/4/LCPLOOPBACK

Message

PPP/4/LCPLOOPBACK:On the interface [interface-name], PPP link was closed because loopback was detected when LCP was negotiating.

Description

During LCP negotiation, a loop was detected, and thus the PPP link was closed.

Parameters

Parameter Name Parameter Meaning
[interface-name] Indicates the local interface name.

Possible Causes

During LCP negotiation, a loop was detected on the link.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 48096

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next