No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



GPS/5/GPSINFORMATION:The location longitude is [DOUBLE1], latitude is [DOUBLE2], speed is [FLOAT], altitude is [DOUBLE3].


GPS information is recorded and provided to the controller and users. GPS information includes the longitude, latitude, moving speed, and altitude.

  • Only the AR511GW-L-B3, AR511GW-LM7, AR503GW-LcM7, AR503GW-LM7 support this log.


Parameter Name Parameter Meaning
[DOUBLE1] Indicates the longitude.
[DOUBLE2] Indicates the latitude.
[FLOAT] Indicates the speed, in km/h.
[DOUBLE3] Indicates the altitude, in meters.

Possible Causes

After the GPS log function is enabled using the gps log enable command, a log is generated every 30 seconds by default. You can run the set gps log record-cycle timer-value command to set the interval for generating a log.


  • This log is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 98015

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next