No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LLDP/4/TOOMANYNEIGHBORS

LLDP/4/TOOMANYNEIGHBORS

Message

LLDP/4/TOOMANYNEIGHBORS:No enough resources to save neighbors

Description

The number of neighbor entries at the remote end exceeds the maximum value.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

In general, the topology does not generate the event that the number of neighbors exceeds the maximum value (the maximum number of global neighbors is 4096, and the maximum number of neighbors under a port is 256). The event happens because the peer device connected to the current device enables the LLDP transparent transmission function so that a large number of non-direct connection devices become the neighbors of the current device.

Procedure

  1. Disable the LLDP function on the ports whose topology information is less important (in the view of the ports, run the undo lldp enable command) to release space for new neighbors.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 47811

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next