No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PIM/3/HOLDTIME_LESS_INL:In VPN instance "[vpn-instance-name]", when the BSR holdtime and sending interval were configured, the BSR holdtime [holdtime] was less than the sending interval [interval]. (FlCode=[STRING][ULONG])


The BSR holdtime is smaller than the BSR sending interval.


Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[holdtime] Indicates the BSR holdtime.
[interval] Indicates the interval for sending BSR messages.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

This log message is generated when BSR parameters are configured or modified.


  1. Run the c-bsr holdtime interval command to reconfigure the BSR holdtime. Run the c-bsr interval interval command to reconfigure the interval for the BSR to send Bootstrap messages. Ensure that the BSR holdtime is greater than the BSR sending interval.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 97398

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next