No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RM/3/LMTNUM_BGER_MAXPAF:RM rejected the setting of routing table limit for instance (ID) [instance-id] because the limit number [limit-route-number] was greater than the maximum route limit defined in PAF [paf-route-limit].


Failed to set the maximum number of routes for the instance because the number of routes exceeded the maximum value defined in the PAF file.


Parameter Name Parameter Meaning
[instance-id] Indicates the ID of an instance.
[limit-route-number] Indicates the maximum number of routes.
[paf-route-limit] Indicates the maximum number of routes defined in the PAF file.

Possible Causes

The number of VPN routes exceeded the maximum value defined in the PAF file.


  1. Confirm the network requirements, and check whether the configuration is correct.
  2. Expand the device if the configuration is correct and a lot of routes are required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 99083

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next