No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



WWAN/5/WWAN_RSSI_NORMAL: The 2G/3G signal of interface [interface-name] become normal, RSSI= [RSSI] dBm.


The strength of 3G signals received by a cellular interface became normal.


Parameter Name Parameter Meaning
[interface-name] Cellular interface name.
[RSSI] Received signal strength indicator (RSSI).

Possible Causes

On a WCDMA or CDMA2000 network, if the strength of received 3G signals is greater than the RSSI threshold 10 consecutive times, and the signal strength becomes normal, the device records this log.

By default, the RSSI threshold used to determine the 3G signal strength is -89 dBm.


  1. This log is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 96677

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next