No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FW-LOG/5/STREAM_SYSFRGUP

FW-LOG/5/STREAM_SYSFRGUP

Message

FW-LOG/5/STREAM_SYSFRGUP:system number of [proto] frag session is too much: [session-count]

Description

The number of fragment connections initiated globally exceeded the maximum value.

Parameters

Parameter Name Parameter Meaning
[proto] Indicates the protocol type of fragment connections. The value can be TCP, UDP, and ICMP.
[session-count] Indicates the number of connections established by a protocol.

Possible Causes

If the traffic monitoring log was enabled, the firewall recorded the log when the number of fragment connections initiated globally exceeded the maximum value.

Procedure

  1. Check logs to find that the number of fragment connections initiated globally exceeded the maximum value. You can change the number if necessary.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 63934

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next