No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



FW/4/SECLOG_SESSION_ID_INFO_SYSLOG:<[SerialNumber]> [record time] [HOSTNAME] [version/module/level]: protocol=[proto] srcIp=[ip-address1] dstIp=[ip-address2] srcPort=[Port1] dstPort=[Port2] startTime=[Time1] endTime=[Time2] inTotalPkg=[INTEGER1] inTotalByte=[INTEGER2] outTotalPkg=[INTEGER3] outTotalByte=[INTEGER4] srcVpn=[vpn-instance-name1] dstVpn=[vpn-instance-name2]


The firewall recorded a log indicating that the interzone firewall flow table was aged.


Parameter Name Parameter Meaning
[SerialNumber] Index of the log.
[record time]

Time when the log is recorded, in the format of YYYY-MM-DD HH:MM:SS.

  • YYYY, MM, and DD indicate the year, month, and date respectively.
  • HH, MM, and SS indicate the hour, minute, and second respectively.
[HOSTNAME] Device name.
  • version: Current version of the device.
  • module: Module that generates logs.
  • level: Log level.
[proto] Protocol type.
[ip-address1] Source IP address of packets.
[ip-address2] Destination IP address of packets.
[Port1] Source interface of packets.
[Port2] Destination interface of packets.
[Time1] Start time of flows.
[Time2] End time of flows.
[INTEGER1] Total number of packets sent into the interzone.
[INTEGER2] Total number of bytes sent into the interzone.
[INTEGER3] Total number of packets flowing out of the interzone.
[INTEGER4] Total number of bytes flowing out of the interzone.
[vpn-instance-name1] Source VPN ID of packets.
[vpn-instance-name2] Destination VPN ID of packets.

Possible Causes

The firewall generated the log when the interzone firewall flow table was aged.


  1. This message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 71446

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next