No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RM/3/IPV6_RCH_MAX_PFX:The number of IPv6 prefixes reached the maximum prefix limit [max-prefix-limit].


The number of IPv6 prefixes in the routing table reached the maximum value.


Parameter Name Parameter Meaning
[max-prefix-limit] Indicates the maximum number of IPv6 prefixes.

Possible Causes

The number of IPv6 prefixes reached the upper limit when a route was added.


  1. Confirm the network requirements, and check whether the configuration is correct.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 97221

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next