No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE/3/ARPS_DROP_PACKET_IF_SPDLMT

SECE/3/ARPS_DROP_PACKET_IF_SPDLMT

Message

SECE/3/ARPS_DROP_PACKET_IF_SPDLMT:Interface exceeds the limited speed value.(SourceMAC=[STRING1], SourceIP=[STRING2], SourceInterface=[STRING3], DropTime=[STRING4])

Description

The rate of ARP packets on the interface exceeds the rate threshold.

Parameters

Parameter Name Parameter Meaning

SourceMAC

Indicates the source MAC address of packets.

SourceIP

Indicates the source IP address of packets.

SourceInterface

Indicates the source interface of packets.

DropTime

Indicates the time ARP packets were discarded.

Possible Causes

The rate of ARP packets on the interface exceeds the rate threshold.

Procedure

  1. Restrict the traffic rate on the interface within the rate limit or increase the rate limit.

Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 58861

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next