No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/6/FAIL_CMD_IN_AMB

ISIS/6/FAIL_CMD_IN_AMB

Message

ISIS/6/FAIL_CMD_IN_AMB:ISIS on the AMB failed to run commands.(FunctionID=[ULONG], DisableFlag=[ULONG])

Description

IS-IS failed to run the command on the AMB.

Parameters

Parameter Name Parameter Meaning

FunctionID

Indicates the ID of the command line.

DisableFlag

Indicates the identifier of disabling the command line.

Possible Causes

This log message was caused by an unpredictable reason.

Procedure

  1. Run the display diagnostic-information command and save the command output; contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 61567

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next