No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ISIS/5/T1TMR_LV1_STOP_CMD:ISIS [process-id] stopped level-1 T1 timer on [interface-name] because of restart disable.(Counter=[USHORT])


IS-IS stopped the Level-1 T1 timer on an interface because the restart command was deleted.


Parameter Name Parameter Meaning


Indicates the ID of an IS-IS process.


Indicates the name of an interface.


Indicates a counter.

Possible Causes

When canceling restart, ensure that related the Level-1 T1 timer is stopped.


  1. This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 70928

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next