No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET/4/LINK_STATE

IFNET/4/LINK_STATE

Message

IFNET/4/LINK_STATE:The line protocol [line-protocol] on the interface [interface-name] has entered the [state] state.

Description

The link layer protocol of the interface changed.

Parameters

Parameter Name Parameter Meaning
[line-protocol] indicates the name of the link layer protocol.
[interface-name] indicates the interface name.
[state] indicates the status of the link layer protocol. The details are as follows:

1. Up: indicates that the status of the link layer protocol on the interface is normal.

2. Down: indicates that the status of the link layer protocol on the interface is abnormal.

Possible Causes

The link layer protocol of the interface changed.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 47697

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next