No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ARP/6/ARP_LOG_BROADCAST_DISABLE: The user chooses [Y/N] when deciding whether to disable the sending of ARP broadcast packets.


The system prompted the user to execute a command.


Parameter Name Parameter Meaning

Character that a user enters to determine whether to execute the arp broadcast disable command

Possible Causes

After the arp broadcast disable command was entered, the system prompted the user to confirm whether to continue the operation and record the result of the confirmation.


  1. This log message is a normal situation, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 96634

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next