No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RIP/6/GR_SND_ABORT

RIP/6/GR_SND_ABORT

Message

RIP/6/GR_SND_ABORT: Sending abort notification to neighbor [IPADDR] on interface [InterfaceName]. (ProcessId=[ULONG])

Description

An unexpected abort notification was sent to the neighbor.

Parameters

Parameter Name Parameter Meaning
[IPADDR] Indicates the IP address of the industrial switch router functioning as GR Restarter.
[InterfaceName] Indicates the interface name.
ProcessId Indicates the process ID.

Possible Causes

An unexpected abort notification, indicating that the topology or configuration was changed, was sent to the neighbor.

Procedure

  1. This log message indicates that the GR process is terminated, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 61980

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next