No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, AR531, AR550, AR1500, and AR2500 Security Hardening And Maintenance Guide

This document provides guidance for strengthening network and device security in terms of network security risks, security architecture, and security hardening policies. It also provides guidance for routine maintenance of device security in terms of the management, control, and forwarding planes.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CP-CAR Configuration Method and Procedure

CP-CAR Configuration Method and Procedure

  1. Configure an ACL to be referenced by the blacklist.
    acl number 4001
     rule 5 permit source-mac 0001-c0a8-0102
  2. Configure an attack defense policy.
    cpu-defend policy devicesafety
  3. Configure a blacklist.
    blacklist 1 acl 4001
  4. Set the rate limit of packets sent to the CPU.
    packet-type arp-request rate-limit 64
  5. Apply the attack defense policy.
    cpu-defend-policy devicesafety
Updated: 2019-05-06

Document ID: EDOC1000097300

Views: 4767

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next