No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Supported NVMe Management Commands

Supported NVMe Management Commands

The ES3000 V3 supports all management commands required by the NVMe 1.2 protocol. The commands are as follows:
  • Delete I/O Submission Queue
  • Create I/O Submission Queue
  • Get Log Page
  • Delete I/O Completion Queue
  • Create I/O Completion Queue
  • Identify
  • Abort
  • Set Feature
  • Get Feature
  • Asynchronous Event Request
The ES3000 V3 also supports the following optional management commands defined by NVMe 1.2:
  • Namespace Management
  • Firmware Commit
  • Firmware Image Download
  • Namespace Attachment
  • Format NVM (Huawei drivers and tools must be used if the format is DIF.)
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 58215

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next