No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading the Driver in ESXi

Upgrading the Driver in ESXi

Operation Scenario

You can upgrade the driver after a new version is released.

Preparations

Before upgrading the driver, download the new driver package to the server and verify the package integrity.

Procedure

  1. Run the hioadm -v command to check whether the tool version is later than 3.3.7.5.

    • If yes, go to 3.
    • If no, go to 2.

  2. Run the following command to uninstall the hioadm tool:

    esxcli software vib remove -n hioadm

  3. Install the new driver. For details, see Installing the ES3000 V3 Driver in ESXi.

    NOTE:
    Install the new driver package directly. The system will automatically replace the old driver.

Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 64724

Downloads: 1259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next