No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Uninstalling the Driver in ESXi

Uninstalling the Driver in ESXi

Operation Scenario

If you want to stop using or replace the ES3000 V3, uninstall the driver first.

Procedure

  1. Log in to the OS as an administrator or a member of the administrator groupo ,hadeo.
  2. Stop or exit the programs or files that are accessing the ES3000 V3.
  3. Run the following command to uninstall the ES3000 V3 driver package:

    esxcli software vib remove -n hiodriver

  4. After the driver is uninstalled, run the reboot command to restart the OS.
  5. After the restart, run the vmkload_mod -l | grep hiodriver command. The following command output indicates that the driver has been uninstalled:

    [root@esxi113:~] vmkload_mod -l | grep hiodriver
    [root@esxi113:~]

Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 66328

Downloads: 1261

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next