No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ES3500P V3 Specifications

ES3500P V3 Specifications

Figure 2-4 shows the nameplates for the ES3500P V3 series.

Figure 2-4  ES3500P V3 series nameplate

Table 2-1 lists the power consumption specifications for the ES3500P V3 series.

Table 2-1  Power consumption specifications for the ES3500P V3 series

Parameter

Specifications

Power consumption

  • 800 GB: 13.5 W maximum power consumptiona and 7 W standby power consumption.
  • 1200 GB: 17 W maximum power consumption and 7 W standby power consumption.
  • 2000 GB: 18.5 W maximum power consumption and 7 W standby power consumption.
  • 3200 GB: 21 W maximum power consumption and 7 W standby power consumption.
  • 4000 GB: 22 W maximum power consumption and 7 W standby power consumption.

Disk Dimensions

Standard 2.5-inch hard disk

a: The maximum power consumption is the test result with the maximum sequential write bandwidth.

Table 2-2 lists the reliability specifications for the ES3500P V3 series.

Table 2-2  Reliability specifications for the ES3500P V3 series

Parameter

Specifications

Mean time between failures (MTBF) 2 x 106 hours
Annual failure rate (AFR) ≤ 0.44%
Bit error rate (BER) 10-17
Data protection ≥ 3 months (40°C, powered off)

Table 2-3 lists the environmental specifications for the ES3500P V3 series.

Table 2-3  Environmental specifications for the ES3500P V3 series

Parameter

Specifications

Temperature
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Drive case temperature: 0°C to 70°C (32°F to 158°F)
Altitude
  • Operating: –305 m to 3048 m (–1000 ft to 10,000 ft)
  • Non-operating: –305 m to 12,192 m (–1000 ft to 40,000 ft)
The highest operating temperature decreases by 1°C (33.8°F) for every increase of 220 m (721.8 ft) in altitude.
Air speed

> 450 LFM at a room temperature of 25°C

> 650 LFM at a room temperature of 35°C

Humidity
  • Storage humidity: 5% RH to 95% RH
  • Operating humidity: 5% RH to 95% RH
Vibration
  • Operating vibration: 2.17 GRMS (5 Hz to 700 Hz)
  • Non-operating vibration: 3.13 GRMS (5 Hz to 800 Hz)
Shock
  • Operating shock: 1,000 G/0.5 ms
  • Non-operating shock: 1,000 G/0.5 ms
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 58330

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next