No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Atomic Write Status for a Specified SSD

Setting the Atomic Write Status for a Specified SSD

Function

This command is used to set the atomic write status for a specified SSD.

Format

hioadm atomicwrite -d devicename -f flag

Parameters

Parameter Description Value
devicename Name of an SSD. Example: nvme0
flag Atomic write status.
  • 0: disabled
  • 1: enabled

Usage Guidelines

None

Example

# Set the atomic write status of the nvme0 SSD to enable.

[root@localhost tool]# hioadm atomicwrite -d nvme0 -f 1
Enable atomic write successed.

System Response

None
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 64832

Downloads: 1259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next