No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Tool Package (Linux)

Installing the Tool Package (Linux)

Operation Scenario

Install the tool package for managing the ES3000 V3.

The tool package naming rules are as follows:
  • For RHEL, CentOS, OEL, or SLES, the package name is hioadm-version number-release number.hardware architecture.rpm, for example, hioadm-3.3.5.2-1.x86_64.rpm.
  • For Ubuntu or Debian, the package name is hioadm-version number-release number.hardware architecture.deb, for example, hioadm-3.3.5.2-1.amd64.deb.

Preparations

  • You have correctly installed the ES3000 V3 on the server.
  • You have downloaded the tool package and verified its integrity.
  • You have used WinSCP or other software to upload the tool package to a directory (for example, /home) on the server.

Procedure

  1. Log in to the operating system (OS) as an administrator.
  2. Go to the directory that stores the tool package, for example, /home.
  3. Run the installation command based on the OS type.

    • For RHEL, CentOS, OEL, or SLES, run rpm -ivh tool package name.

      Example: rpm -ivh hioadm-3.3.5.2-1.x86_64.rpm

    • For Ubuntu or Debian, run dpkg -i tool package name.

      Example: dpkg -i hioadm-3.3.5.2-1.amd64.deb

  4. Run the following command to obtain help information about the tool:

    hioadm -h or hioadm --help

  5. Copy linux/tool/ host_info_collect.sh to /opt/hio.
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 57419

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next