No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the SNMP Function in Linux

Configuring the SNMP Function in Linux

This section describes how to configure the SNMP function in Linux.

Preparations

Before configuring the SNMP function, check that:

  • You have correctly installed the ES3000 V3 on the server.
  • Net-SNMP is correctly installed in Linux and you have determined the Net-SNMP software version by running the following command:
    [root]#snmpd -v
  • You have determined the directory storing the snmpd.conf file as follows:
    [root]#net-snmp-config --snmpconfpath
    /usr/local/share/snmp

Procedure

  • Install the software.
    1. Log in to the OS as the root user.
    2. Access the software package directory, such as the /root directory.
    3. Install the Linux driver and tool package. For details, see Installing the ES3000 V3 Driver in Linux and Installing the Tool Package (Linux).
    4. If the snmpd.conf file is in /usr/local/share/snmp/snmpd.conf, run the following command to open the file:

      vim /usr/local/share/snmp/snmpd.conf

    5. Add content as follows:

      • If the Net-SNMP versionis 5.6, add the following content to the snmpd.conf file:
        dlmod es3000v3 /usr/lib/es3000v3_snmp_5.6.so
      • If the Net-SNMP versionis 5.7, add the following content to the snmpd.conf file:
        dlmod es3000v3 /usr/lib/es3000v3_snmp_5.7.so

    6. Press Esc to exit the edit mode. Enter :wq and press Enter. Save and exit the snmpd.conf file.
    7. If SNMP v3 is enabled, stop SNMP services before running the following command:

      net-snmp-config --create-snmpv3-user -ro -a (Huawei123#$) -A MD5 (v3user)

      Huawei123#$ is the password. v3user is an SNMP user name. You can change the user name and password.

    8. Run the following command to start SNMP services:

      service snmpd start

    9. If SNMP services are already running, run the following command to restart SNMP services:

      service snmpd restart

  • Uninstall the software.
    1. Log in to the OS as the root user.
    2. Uninstall the Linux tool package. For details, see Uninstalling the Tool Package (Linux).
    3. Open the snmpd.conf file described in the installation procedure and delete the following content (assuming that the Net-SNMP version is 5.7):

      dlmod es3000v3 /usr/lib/es3000v3_snmp_5.7.so

Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 58128

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next