No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Activating the Firmware of an SSD

Activating the Firmware of an SSD

Function

This command is used to activate the firmware of an SSD.
If you run the following command with activeflag set to 1 (that is, firmware will be activated immediately), services may be stopped. Before running this command, ensure that stopping services has no adverse impact.

Format

hioadm updatefw -d devicename [-s slot] [-a activeflag]

Parameters

Parameter Description Value
devicename Name of an SSD. Example: nvme0
slot Slot of the target firmware image. 1 to 3
activeflag Firmware activation mode.
  • 0: Activates firmware after the next reset.
  • 1: Activates firmware immediately.

Usage Guidelines

None

Example

# Activate the nvme0 firmware after the next reset.

[root@localhost tool]# hioadm updatefw -d nvme0 -s 2 -a 0
slot  version   activation  
1    1.01       
2    2.11     next  
3    2.09     current  


WARNING! Activate immediately might abort IO.
WARNING! You have selected the update firmware operation. 
Proceed with the update firmware? (Y|N): y         
Activating the firmware image at slot <2> successed.
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 63896

Downloads: 1257

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next