No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hardware Connection Faults or Other Faults

Hardware Connection Faults or Other Faults

Hardware connection faults are mostly identified by indicators. If the yellow indicator of a device is on and the green indicator is off 30 seconds after a new disk is installed or during proper operating, hardware faults occur. See Indicator Status Descriptions to identify the faults.

Typical fault causes are as follows:

  • The disk is not securely installed.
  • The disk is installed in a non-NVMe slot.
  • A disk hardware port fault occurs.
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 57358

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next