No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Tool Package (Windows)

Installing the Tool Package (Windows)

Operation Scenario

Install the tool package for managing the ES3000 V3. The ES3000 V3 tool is incompatible with the NVMe driver built in the Windows OS. Ensure that you have installed Huawei's NVMe driver before using the tool.

Preparations

  • You have correctly installed the ES3000 V3 on the server.
  • You have downloaded the tool package and verified its integrity.
  • You have uploaded the tool package to the server by using Windows Secure Copy (WinSCP) or other software.

Procedure

  1. Log in to the operating system (OS) as an administrator or administrator group member.
  2. Double-click the tool package file hioadm_v3.3.5.4_x86_64.msi.

    NOTE:
    v3.3.5.4 indicates a driver version number. This procedure uses hioadm_v3.3.5.4_x86_64.msi as an example.
    The installation interface is displayed, as shown in Figure 3-20.
    Figure 3-20  Installation interface

  3. Click Next.

    The End-User License Agreement window is displayed, as shown in Figure 3-21.

    Figure 3-21  End-User License Agreement window

  4. Select I accept the terms in the License Agreement and click Next.

    The Destination Folder window is displayed, as shown in Figure 3-22.

    Figure 3-22  Destination Folder window

  5. Select a folder for installing the tool and click Next.

    The Ready to install window is displayed, as shown in Figure 3-23.

    Figure 3-23  Ready to install window

  6. Click Install to start installation.

    When the installation is complete, the Completing Setup Wizard window is displayed, as shown in Figure 3-24.

    Figure 3-24  Completing Setup Wizard window

  7. Click Finish.
  8. Copy windows\Windows_Tool\diagnostic_win.bat to C:\Program Files (x86)\hioadm.
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 58529

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next