No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing an ES3000 V3 NVMe PCIe SSD Card on a Riser Card

Removing an ES3000 V3 NVMe PCIe SSD Card on a Riser Card

Prerequisites

Wear ESD gloves.

Procedure

  1. Turn off the power to the server and remove the chassis cover.
  2. Remove all the cables from the riser card.
  3. Hold the upper part of an ES3000 V3 NVMe PCIe SSD card and remove it slowly. See Figure 5-8.

    Figure 5-8  Removing an ES3000 V3 NVMe PCIe SSD card

  4. Place the removed PCIe card in an ESD bag.
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 64780

Downloads: 1259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next