No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to Windows GUI

Introduction to Windows GUI

This section describes the Windows GUI tool in the Windows tool package.

After installing the ES3000 V3 tool package in Windows, access the Windows GUI tool as follows:
  • If the .NET Framework version is 2.0 or 3.5, double-click the HioadmGUI_DotNet_2.0.exe file in the tool installation directory.
  • If the .NET Framework version is 4.0 or 4.5, double-click the HioadmGUI_DotNet_4.0.exe file in the tool installation directory.

BaseInfo Page

This page shows the basic information about controllers and namespaces, as shown in Figure E-1.

Figure E-1  BaseInfo page

eject: Used to notify the OS to eject a device before manually removing a device. (Windows Server 2008 R2 does not support the ejection.)

In the left pane, NS indicates a namespace associated with the controller; ns indicates a namespace not associated with any controllers. See Figure E-2.

Figure E-2  Basic information

Update Page

This page is used to upgrade the ES3000 V3 firmware, as shown in Figure E-3 and Figure E-4.

Figure E-3  Update page with no firmware upgrade image selected
Figure E-4  Update page with a firmware upgrade image selected
  • select image: Select a ES3000 V3 firmware upgrade image provided by Huawei.
  • select slot: only slots 1, 2, and 3 are available. Slot 1 supports only activation and does not support upgrade.
  • After a firmware image is selected, the active button becomes an update button.
  • activation: Select an activation mode. For details, see Activating the Firmware of an SSD.

DiskMgnt Page

This page is used to format the ES3000 V3, as shown in Figure E-5.

Figure E-5  DiskMgnt page

Functions on this page are the same as the operations described in Formatting, Querying and Setting the Capacity, and Safely Erasing User Data of an SSD.

If setting cap is set to 0, the current capacity is set to the original capacity.

SelfTest Page

This page is used to diagnose the ES3000 V3, as shown in Figure E-6.

Figure E-6  SelfTest page

Functions on this page are the same as the operations described in Querying the Diagnosis Result of a Specified SSD.

NS Mgnt Page

This page is used to manage namespaces, as shown in Figure E-7.

Figure E-7  NS Mgnt page

This page provides the following functions, which are the same as the operations described in Querying and Configuring Namespaces.

  • Create a namespace. You can create a namespace with a size not exceeding the remaining capacity. You can also attach the namespace to specified controllers during the creation. See Figure E-8.
  • Delete a namespace.
  • Attach a namespace to controllers.
  • Detach a namespace from controllers.
Figure E-8  Information about NS1

DevMgnt Page

This page is used to manage the ES3000 V3s, as shown in Figure E-9.

Figure E-9  DevMgnt page

This page provides the following functions:

  • power state: Set the power consumption level.
  • write mode: Set the write mode.
  • temperature: View disk temperature information, including the highest historical temperature, number of overtemperature occurrences, and overtemperature duration.
  • threshold setting: Set temperature thresholds.
  • controller: View controller temperature information, including the highest historical temperature, number of overtemperature occurrences, and overtemperature period.
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 58645

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next