No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
System Requirements

System Requirements

This section describes the ES3000 V3 requirements for server software and hardware.

Hardware Requirements

The minimum requirements for server hardware are as follows:

  • 2 GB memory
  • To use the ES3000 V3 NVMe PCIe SSD disk, the server must provide at least one 2.5-inch SSD disk slot that supports the PCIe SFF-8639 connector.
  • To use the ES3000 V3 NVMe PCIe SSD card, the server must provide at least one half-height, half-length (167.5 mm x 70 mm x 18.6 mm) PCIe 3.0 x4 card slot.

Software Requirements

Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 57581

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next