No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Collecting SSD Logs

Collecting SSD Logs

Operation Scenario

Collect SSD information when maintaining SSDs.


  1. Log in to the OS as an administrator or a member in the administrator group.
  2. Run the following command to collect the SSD controller (such as nvme0) log information:

    hioadm log -d nvme0 -a

    The command output shows the log collecting result and file path.

    [root@localhost tool]# hioadm log -d nvme0 -a 
    firmware key log saving..........OK 
    save firmware key log file successed(/opt/hio/nvme0_key.log) 
    firmware all log saving..........OK 
    save firmware all log file successed(/opt/hio/nvme0_fw.log) 
    firmware core dump log saving..........OK 
    save firmware core dump log file successed(/opt/hio/nvme0_coredump.log) 
    other log saving..........OK 
    save other logs file successed(/opt/hio/nvme0_other.log) 
    logs has been saved.

Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 64920

Downloads: 1259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next