No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
One-Click Log Collection

One-Click Log Collection

Scenario

Collect SSD and system operation logs when maintaining SSD devices.

Prerequisite

You have downloaded the software package from the Software Download tab at http://support.huawei.com/enterprise (Product Support > Enterprise Data Center > Servers > Acceleration Component > ES3000 V3.

Install the hioadm tool before performing one-click log collection. For details about how to install the tool, see section Installing the Tool Package.

Linux

  1. Copy host_info_collect.sh from /linux/tool in the package to /opt/hio.
  2. Log in to the OS as an administrator or a member in the administrator group.
  3. Run the bash /opt/hio/host_info_collect.sh command.
  4. Obtain the log file hostInfoCollect.zip from the /opt/hio directory.
  5. (Optional) Delete the log file after use to free disk space.

Windows

  1. Copy diagnostic_win.bat from /windows/Windows_Tool in the package to C:\Program Files (x86)\hioadm.
  2. Log in to the OS as an administrator or a member in the administrator group.
  3. Double-click diagnostic_win.ba in C:\Program Files (x86)\hioadm\.
  4. Obtain all log files from the C:\Program Files (x86)\hioadm\ directory.
  5. (Optional) Delete the log file after use to free disk space.

ESXi

  1. Copy host_okc.sh from /vmware in the package to /scratch/hio/.
  2. Log in to the OS as an administrator or a member in the administrator group.
  3. Run the sh /scratch/hio/host_okc.sh command.
  4. Obtain all log files from the /scratch/hio/okc directory.
  5. (Optional) Delete the log file after use to free disk space.
Translation
Download
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 57386

Downloads: 1240

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next