No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ES3000 V3 NVMe PCIe SSD User Guide 20

This document provides the product information about the Huawei ES3000 V3 PCIe SSD (ES3000 V3 for short) and describes how to install, configure, operate, and maintain the ES3000 V3.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disk Identification Faults or Other Faults

Disk Identification Faults or Other Faults

Disk identification faults indicate scenarios where the host OS disk manager (for example, fdisk-l in Linux and the device manager in Windows) cannot properly identify ES3000 SSDs when hardware connections are correct. If disk identification faults occur, collect all logs. For details, see One-Click Log Collection.

Typical fault causes are as follows:

  • The NVMe driver is not installed on the OS.
  • OS driver loading fails.
Updated: 2019-03-12

Document ID: EDOC1000101091

Views: 64655

Downloads: 1259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next