No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V300R005C00 File System Feature Guide 11

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Operations

Configuration Operations

Based on the requirement analysis and service planning, this section describes how to configure InfoTier for the TV station to store and manage data properly.

Prerequisites

Performance_Pool consisting of P25 nodes and Capacity_Pool consisting of C72 nodes have been deployed.

Context

The InfoTier configuration process includes creating storage tiers, configuring node pools, and configuring file pool policies. Figure 3-6 shows the InfoTier configuration flowchart.
Figure 3-6  InfoTier configuration flowchart

Procedure

  1. Log in to DeviceManager.
  2. Create Performance_Tier.
    1. Choose Provisioning > InfoTier > Tier Management.
    2. Click Create in the upper part of the page as shown in Figure 3-7, enter a name for the storage tier in Name, and click OK.

      Figure 3-7  Creating a storage tier

  3. Repeat 2 to create Capacity_Tier.
  4. Configure watermark thresholds, owning storage tiers, and the Spillover function for Performance_Pool as planned.
    1. Choose Provisioning > InfoTier > Tier Management.
    2. Select the owning storage tier of the node pool that is going to configure (the default owning storage tier is defaultTier), click Performance_Pool in the lower part of the page, and then click Properties as shown in Figure 3-8.

      Figure 3-8  Entrance of setting properties for a node pool

    3. In the Node Pool Properties window that is displayed, set properties for Performance_Pool, and click OK to complete the setting, as shown in Figure 3-9.

      Figure 3-9  Setting properties for a node pool

  5. Repeat 4, configure the Capacity_Pool as planned.
  6. Configure the file pool policy Performance_Policy.
    1. Choose Provisioning > InfoTier > File Pool Policy.
    1. Click Create, and the Create File Pool Policy Wizard page displays. Configure the parameters as shown in Figure 3-10.

      Figure 3-10  Setting a file pool policy

  7. Repeat 6 to create Capacity_Policy as planned.
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000101823

Views: 15494

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next