No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the SNMP Versions

Configuring the SNMP Versions

Three SNMP versions are available: v1, v2c, and v3. The default version is SNMPv3.

# Configure SNMPv2c and SNMPv3 on the device.
<HUAWEI> system-view
[~HUAWEI] snmp-agent sys-info version v2c
[*HUAWEI] commit
# Configure all SNMP versions on the device.
<HUAWEI> system-view
[~HUAWEI] snmp-agent sys-info version all
[*HUAWEI] commit
# Configure SNMPv2c on the device.
<HUAWEI> system-view
[~HUAWEI] snmp-agent sys-info version v2c
[*HUAWEI] snmp-agent sys-info version v3 disable
[*HUAWEI] commit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 240548

Downloads: 3273

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next