No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Blacklist

Configuring a Blacklist

To defend against malicious packet attacks, the device uses ACLs to add users with the specific characteristic into a blacklist and discards the packets from the users in the blacklist.

A maximum of 8 blacklists can be configured in an attack defense policy on the device.

The ACL you want to use must have been created.

Apply ACL 2001 to blacklist 2.

<HUAWEI> system-view
[~HUAWEI] cpu-defend policy test
[*HUAWEI-cpu-defend-policy-test] blacklist 2 acl 2001
[*HUAWEI-cpu-defend-policy-test] commit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 236748

Downloads: 3262

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next