No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Loading and Running a Patch

Loading and Running a Patch

Before loading a patch on a switch, upload the correct and valid patch package to the root directory (Flash:/) of the storage medium on the switch.

  • Method 1: Loading and Then Running the Patch
    <HUAWEI> patch load patch.pat all active    //Load the patch in the system and directly activate it.
    <HUAWEI> patch run all      //Run the patch.
  • Method 2: Loading and Running the Patch Simultaneously
    <HUAWEI> patch load patch.pat all run     //Load and run the patch.
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 195997

Downloads: 3214

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next