No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Loading a Patch File for a Stack

Loading a Patch File for a Stack

The process of loading patches to a stack is similar to that on a standalone switch.
  1. Upload a patch package to the master switch.

  2. Run the patch load filename all run command in the user view to load and run patches.

    The patch file on the master switch will be automatically copied and loaded to other member switches.

  3. Run the display patch-information verbose command to check whether patches are loaded successfully.

Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 238236

Downloads: 3273

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next