No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Backup IP Address

Configuring the Backup IP Address

If a backup IP address is configured for a stack member switch and the switch fails DAD competition after the stack split, the switch uses the backup IP address to prevent an IP address conflict with other switches. You can then remotely log in to the switch to locate and rectify faults.

<HUAWEI> system-view
[~HUAWEI] interface meth 0/0/0
[~HUAWEI-MEth0/0/0] dual-active backup ip address 192.168.1.175 24 member all
[*HUAWEI-MEth0/0/0] commit
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 122275

Downloads: 3136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next