No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Interfaces with Different Rates to an Eth-Trunk

Adding Interfaces with Different Rates to an Eth-Trunk

  • On CE switches running versions earlier than V200R002C50, rates of Eth-Trunk member interfaces are required to be the same.

  • On CE switches running V200R002C50 and later versions, interfaces with different rates can be added to the same Eth-Trunk in LACP mode.

# Add interfaces 10GE1/0/1 and 40GE1/0/1 with different rates to Eth-Trunk1.
<HUAWEI> system-view
[~HUAWEI] interface eth-trunk 1
[*HUAWEI-Eth-Trunk1] mode lacp-static
[*HUAWEI-Eth-Trunk1] lacp mixed-rate link enable
[*HUAWEI-Eth-Trunk1] trunkport 10ge 1/0/1
[*HUAWEI-Eth-Trunk1] trunkport 40ge 1/0/1
[*HUAWEI-Eth-Trunk1] commit

When Eth-Trunk member interfaces work at different rates, the active interface is selected as follows: select an Actor based on the system priority and system ID, and then select the active interface based on the port priority and port ID of the Actor. You can run the lacp priority command in the interface view to adjust the interface priority so that the current interface can become the active interface.

Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 236228

Downloads: 3262

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next