No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Broadcast Storm Control on an Interface

Configuring Broadcast Storm Control on an Interface

Excessive broadcast packets on inbound and outbound interfaces will cause broadcast storm. To limit the rate of broadcast packets, configure broadcast storm control on the inbound and outbound interfaces.

For example, configure broadcast storm control on 10GE1/0/1.

<HUAWEI> system-view
[~HUAWEI] interface 10ge 1/0/1
[~HUAWEI-10GE1/0/1] storm control broadcast min-rate 1000 max-rate 2000 //Set the lower threshold to 1000 pps and upper threshold to 2000 pps.
[*HUAWEI-10GE1/0/1] storm control action error-down //Set the action for storm control to interface shutdown.
[*HUAWEI-10GE1/0/1] commit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 240546

Downloads: 3273

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next