No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an IP Address for a Layer 3 Sub-interface

Configuring an IP Address for a Layer 3 Sub-interface

Run the ip address ip-address { mask | mask-length } [ sub ] command in the Layer 3 sub-interface view to configure an IP address for a Layer 3 sub-interface.

# Configure an IP address for Layer 3 sub-interface 10GE1/0/1.1 and allow the packets with the VLAN tag 100 to pass through.

<HUAWEI> system-view
[~HUAWEI] interface 10ge 1/0/1
[~HUAWEI-10GE1/0/1] undo portswitch
[*HUAWEI-10GE1/0/1] quit
[*HUAWEI] interface 10ge 1/0/1.1
[*HUAWEI-10GE1/0/1.1] ip address 10.1.1.1 24
[*HUAWEI-10GE1/0/1.1] dot1q termination vid 100
[*HUAWEI-10GE1/0/1.1] commit
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 124319

Downloads: 3136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next