No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Access Control

Configuring Access Control

To ensure switch security, you can configure the access control list (ACL) and MIB views to restrict the access of NMS to the switch.

# Configure ACL 2001 to allow only the NMS on to access the switch.
<HUAWEI> system-view
[~HUAWEI] acl 2001
[*HUAWEI-acl4-basic-2001] rule permit source
[*HUAWEI-acl4-basic-2001] rule deny source any
[*HUAWEI-acl4-basic-2001] commit
# Configure the MIB view named alliso and the accessed view includes iso.
<HUAWEI> system-view
[~HUAWEI] snmp-agent mib-view included alliso iso
[*HUAWEI] commit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 194170

Downloads: 3212

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next