No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the SNMPv3 User Group and User Name

Configuring the SNMPv3 User Group and User Name

SNMPv3 supports user groups and user names, but SNMPv1 and SNMPv2c do not support. By default, the device runs SNMPv3.

The security level of a user must be higher than or equal to the security level of the corresponding user group. The security levels in descending order include:
  • privacy: authentication and encryption
  • authentication: authentication and no encryption
  • none: no authentication and no encryption

If a user group is at the privacy level, users in this group must be at the privacy level. If a user group is at the authentication level, users in this group must be at the privacy or authentication level.

# Set the user group name to group001. Set the security level to privacy, and configure access control to restrict the access of an NMS to the device.
<HUAWEI> system-view
[~HUAWEI] snmp-agent group v3 group001 privacy write-view alliso acl 2001
[*HUAWEI] commit
# Set the user name to user001. Set the authentication password to Authe@1234 and encryption password to Priva@1234.
<HUAWEI> system-view
[~HUAWEI] snmp-agent usm-user v3 user001 group group001
[*HUAWEI] snmp-agent usm-user v3 user001 authentication-mode sha
Please configure the authentication password (8-255)
Enter Password:               //Enter the authentication password.
Confirm Password:             //Confirm the authentication password.
[*HUAWEI] snmp-agent usm-user v3 user001 privacy-mode aes256
Please configure the privacy password (8-255)
Enter Password:              //Enter the encryption password.
Confirm Password:            //Confirm the encryption password.
[*HUAWEI] commit
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 195941

Downloads: 3214

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next