No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Route Summarization

Configuring Route Summarization

A large number of routing entries in an OSPF routing table greatly slow down route searches. You can configure route summarization to reduce the size of the OSPF routing table and simplify management.

  • Configure route summarization on an ABR.

    <HUAWEI> system-view
    [~HUAWEI] ospf 100
    [*HUAWEI-ospf-100] area 1
    [*HUAWEI-ospf-100-area-] abr-summary   //Summarize routes with the same IP prefix in area 1 into one route and advertise the summarized route.
    [*HUAWEI-ospf-100-area-] commit
  • Configure route summarization on an ASBR.

    <HUAWEI> system-view
    [~HUAWEI] ospf 100
    [*HUAWEI-ospf-100] asbr-summary not-advertise tag 2 cost 100  //Summarize the imported routes with the same IP prefix into one route, set the tag to 2 and the cost to 100 for the summarized route, and do not advertise the summarized route.
    [*HUAWEI-ospf-100] commit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 236238

Downloads: 3262

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next