No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a VRRP Group in Active/Standby Mode

Configuring a VRRP Group in Active/Standby Mode

# Configure VRRP group 1 on the master, and set the priority of the master to 120 and the preemption delay to 20s.

<HUAWEI> system-view
[~HUAWEI] interface vlanif 100
[*HUAWEI-Vlanif100] vrrp vrid 1 virtual-ip 10.1.1.111
[*HUAWEI-Vlanif100] vrrp vrid 1 priority 120
[*HUAWEI-Vlanif100] vrrp vrid 1 preempt timer delay 20
[*HUAWEI-Vlanif100] commit
[~HUAWEI-Vlanif100] quit

# Configure VRRP group 1 on the backup. The backup uses the default priority 100.

<HUAWEI> system-view
[~HUAWEI] interface vlanif 100
[*HUAWEI-Vlanif100] vrrp vrid 1 virtual-ip 10.1.1.111
[*HUAWEI-Vlanif100] commit
[~HUAWEI-Vlanif100] quit
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 141873

Downloads: 3156

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next