No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the System Date and Time

Configuring the System Date and Time

Run the clock datetime [ utc ] HH:MM:SS YYYY-MM-DD command in the user view to configure the current date and time of the switch.

# Set the current date and time of the switch to 2016-01-01 00:00:00.

<HUAWEI> clock datetime 0:0:0 2016-01-01
NOTE:

If the scheduled restart function is configured using the schedule reboot { at time | delay interval [ force ] } command in the user view, and the system time is over 10 minutes later than the scheduled restart time, the scheduled restart function becomes ineffective. For example, if the scheduled restart time is 2016-01-01 00:00:00 and the system time is changed to 2016-01-01 01:00:00, the scheduled restart function becomes ineffective.

Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 140887

Downloads: 3153

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next