No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting the Configuration on a Specified Interface

Deleting the Configuration on a Specified Interface

You can use either of the following methods to delete the configuration on a specified interface:

# Run the following commands in the system view (10GE1/0/1 is used as an example):
<HUAWEI> system-view
[~HUAWEI] clear configuration interface 10ge 1/0/1
Warning: All running configurations of the interface will be cleared immediately. Continue? [Y/N]: y
Info: Total 2 commands executed, 2 successful, 0 failed.
# Run the following commands in the interface view (10GE1/0/1 is used as an example):
<HUAWEI> system-view
[~HUAWEI] interface 10ge 1/0/1
[~HUAWEI-10GE1/0/1] clear configuration this
Warning: All running configurations of the interface will be cleared immediately. Continue? [Y/N]: y
Info: Total 2 commands executed, 2 successful, 0 failed.
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 125093

Downloads: 3136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next